Point of Use Water Coolers - (mains connected)

Models

RP1 - Cold Only
RP2 - Cook & Cold
RP3 - Hot & Cold

Features:

• No drain required
• Unique float valve assembly
• Contemporary design to suit any workplace
• World class reliability and performance
• Cup holder bracket (and cover) included
• Stainless steel reservoirs
• Proudly Australian Made

Cold Water Reservoir

All products have a highly polished, stainless steel tank, which holds 1.8litres of chilled water during normal usage. Each cooler has a chilling capacity of 5 litres per hour during peak periods.

Hot Water Reservoir

The RP3 has a stainless steel hot water tank, which is fitted with a "wrap around" heating element and two thermostats for reliability and accuracy of water temperature. This tank will deliver approximately 65 cups (150ml) per hour at plus 85°c. Each tank is fitted with a drain for easy sanitisation.

Refrigeration

All models use 40 gms of refrigerant H134A which is non-toxic, non-flammable and environmentally friendly. Refrigerant flow is controlled by a capillary tube which has no moving parts.

Temperature Control

The thermostat is factory pre-set.

Compressors

1/16 hp capacity, 49 watts. The compressor is hermetically sealed for silent running.

Condensor

The static condensor is fabricated from steel tube and wire.

Electrical

240 volts, 50Hz. A 2 metre house cable and three pin plug is supplied.

Performance to ARI 1010-94 Standard

• Inlet water - 26.7°c
• Outlet water - 10°c
• Ambient air - 32.2°c

Weight Packed

RP1/RP2 - 15kg
RP3 - 16kg

Dimensions

Warranty

Twelve months comprehensive coverage.
Five years for compressor replacement.

Note

All models are fitted with a dust seal and air filter maintain water quality.